EG-F-030

ASME B16.5 (ANSI) Class 600 Socket Weld Flanges

Stepped socket accepts the pipe end. Check the socket bore, insertion depth and connected pipe dimensions.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Length through hub (Y)	Hub OD (X)	Bore (B1)	Socket bore (B2)	Socket depth (D)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-030-001	1/2	3.75 in	0.56 in	1.38 in	0.88 in	1.50 in	Specified by purchaser	0.88 in	0.38 in	2 lb	2.63 in	4	0.63 in
EG-F-030-002	3/4	4.63 in	0.63 in	1.69 in	1.00 in	1.88 in	Specified by purchaser	1.09 in	0.44 in	3 lb	3.25 in	4	0.75 in
EG-F-030-003	1	4.88 in	0.69 in	2.00 in	1.06 in	2.13 in	Specified by purchaser	1.36 in	0.50 in	4 lb	3.50 in	4	0.75 in
EG-F-030-004	1 1/4	5.25 in	0.81 in	2.50 in	1.13 in	2.50 in	Specified by purchaser	1.70 in	0.56 in	5 lb	3.88 in	4	0.75 in
EG-F-030-005	1 1/2	6.13 in	0.88 in	2.88 in	1.25 in	2.75 in	Specified by purchaser	1.95 in	0.63 in	7 lb	4.50 in	4	0.88 in
EG-F-030-006	2	6.50 in	1.00 in	3.63 in	1.44 in	3.31 in	Specified by purchaser	2.44 in	0.69 in	9 lb	5.00 in	8	0.75 in
EG-F-030-007	2 1/2	7.50 in	1.13 in	4.13 in	1.63 in	3.94 in	Specified by purchaser	2.94 in	0.75 in	13 lb	5.88 in	8	0.88 in
EG-F-030-008	3	8.25 in	1.25 in	5.00 in	1.81 in	4.63 in	Specified by purchaser	3.57 in	0.81 in	16 lb	6.63 in	8	0.88 in

Facing in this dimensional series: 1/4 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.