EG-F-038
ASME B16.5 (ANSI) Class 1500 带颈平焊法兰
法兰套入管端，以角焊缝连接；选型需明确内径、密封面与配对孔系。
| 系列 | ASME B16.5（ANSI） |
| 等级 | 1500 |
| 规格范围 | NPS 1/2–12 |
| 尺寸条目 | 14 |
产品形式示意；具体尺寸以所选规格表为准。
尺寸符号示意
尺寸与螺栓孔系
in = 英寸 · lb = 磅
表格可左右滑动查看完整参数，重量为参考值。
| 目录编号 | 公称管径 NPS | 外径 (O) | 厚度 (T) | 突面直径 (R) | 含颈总高 (Y) | 颈部外径 (X) | 内孔 (B) | 参考重量 | 螺栓孔中心圆 (C) | 螺栓孔数 | 螺栓孔径 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EG-F-038-001 | 1/2 | 4.75 in | 0.88 in | 1.38 in | 1.25 in | 1.50 in | 0.88 in | 4 lb | 3.25 in | 4 | 0.88 in |
| EG-F-038-002 | 3/4 | 5.13 in | 1.00 in | 1.69 in | 1.38 in | 1.75 in | 1.09 in | 5 lb | 3.50 in | 4 | 0.88 in |
| EG-F-038-003 | 1 | 5.88 in | 1.13 in | 2.00 in | 1.63 in | 2.06 in | 1.36 in | 8 lb | 4.00 in | 4 | 1.00 in |
| EG-F-038-004 | 1 1/4 | 6.25 in | 1.13 in | 2.50 in | 1.63 in | 2.50 in | 1.70 in | 9 lb | 4.38 in | 4 | 1.00 in |
| EG-F-038-005 | 1 1/2 | 7.00 in | 1.25 in | 2.88 in | 1.75 in | 2.75 in | 1.95 in | 12 lb | 4.88 in | 4 | 1.13 in |
| EG-F-038-006 | 2 | 8.50 in | 1.50 in | 3.63 in | 2.25 in | 4.13 in | 2.44 in | 25 lb | 6.50 in | 8 | 1.00 in |
| EG-F-038-007 | 2 1/2 | 9.63 in | 1.63 in | 4.13 in | 2.50 in | 4.88 in | 2.94 in | 36 lb | 7.50 in | 8 | 1.13 in |
| EG-F-038-008 | 3 | 10.50 in | 1.88 in | 5.00 in | 2.88 in | 5.25 in | 3.57 in | 48 lb | 8.00 in | 8 | 1.25 in |
| EG-F-038-009 | 4 | 12.25 in | 2.13 in | 6.19 in | 3.56 in | 6.38 in | 4.57 in | 73 lb | 9.50 in | 8 | 1.38 in |
| EG-F-038-010 | 5 | 14.75 in | 2.88 in | 7.31 in | 4.13 in | 7.75 in | 5.66 in | 130 lb | 11.50 in | 8 | 1.63 in |
| EG-F-038-011 | 6 | 15.50 in | 3.25 in | 8.50 in | 4.69 in | 9.00 in | 6.72 in | 165 lb | 12.50 in | 12 | 1.50 in |
| EG-F-038-012 | 8 | 19.00 in | 3.63 in | 10.63 in | 5.63 in | 11.50 in | 8.72 in | 260 lb | 15.50 in | 12 | 1.75 in |
| EG-F-038-013 | 10 | 23.00 in | 4.25 in | 12.75 in | 6.25 in | 14.50 in | 10.88 in | 435 lb | 19.00 in | 12 | 2.00 in |
| EG-F-038-014 | 12 | 26.50 in | 4.88 in | 15.00 in | 7.13 in | 17.75 in | 12.88 in | 580 lb | 22.50 in | 16 | 2.13 in |
选型说明
本尺寸系列密封面：1/4 in 突面（RF）。
全平面（FF）要求可在询价中注明。
Class 等级不等于直接工作压力值。订购前应确认材质牌号、温度、密封面及适用标准版本。
告诉我们您的法兰规格。
提供标准、等级、规格、材质与数量；定制需求可附图纸。