EG-F-016

ASME B16.5 (ANSI) Class 300 Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-016-001	1/2	3.75 in	0.56 in	1.38 in	2 lb	2.63 in	4	0.63 in
EG-F-016-002	3/4	4.63 in	0.63 in	1.69 in	3 lb	3.25 in	4	0.75 in
EG-F-016-003	1	4.88 in	0.69 in	2.00 in	3 lb	3.50 in	4	0.75 in
EG-F-016-004	1 1/4	5.25 in	0.75 in	2.50 in	4 lb	3.88 in	4	0.75 in
EG-F-016-005	1 1/2	6.13 in	0.81 in	2.88 in	6 lb	4.50 in	4	0.88 in
EG-F-016-006	2	6.50 in	0.88 in	3.63 in	8 lb	5.00 in	8	0.75 in
EG-F-016-007	2 1/2	7.50 in	1.00 in	4.13 in	12 lb	5.88 in	8	0.88 in
EG-F-016-008	3	8.25 in	1.13 in	5.00 in	16 lb	6.63 in	8	0.88 in
EG-F-016-009	3 1/2	9.00 in	1.19 in	5.50 in	21 lb	7.25 in	8	0.88 in
EG-F-016-010	4	10.00 in	1.25 in	6.19 in	27 lb	7.88 in	8	0.88 in
EG-F-016-011	5	11.00 in	1.38 in	7.31 in	35 lb	9.25 in	8	0.88 in
EG-F-016-012	6	12.50 in	1.44 in	8.50 in	50 lb	10.63 in	12	0.88 in
EG-F-016-013	8	15.00 in	1.63 in	10.63 in	81 lb	13.00 in	12	1.00 in
EG-F-016-014	10	17.50 in	1.88 in	12.75 in	124 lb	15.25 in	16	1.13 in
EG-F-016-015	12	20.50 in	2.00 in	15.00 in	185 lb	17.75 in	16	1.25 in
EG-F-016-016	14	23.00 in	2.13 in	16.25 in	250 lb	20.25 in	20	1.25 in
EG-F-016-017	16	25.50 in	2.25 in	18.50 in	295 lb	22.50 in	20	1.38 in
EG-F-016-018	18	28.00 in	2.38 in	21.00 in	395 lb	24.75 in	24	1.38 in
EG-F-016-019	20	30.50 in	2.50 in	23.00 in	505 lb	27.00 in	24	1.38 in
EG-F-016-020	22	33.00 in	2.63 in	25.25 in	640 lb	29.25 in	24	1.63 in
EG-F-016-021	24	36.00 in	2.75 in	27.25 in	790 lb	32.00 in	24	1.63 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.