EG-F-032
ASME B16.5 (ANSI) Class 900 Slip-On Flanges
Slip-over pipe connection. Select the bore, flange facing and drilling pattern for the mating connection.
| Series | ASME B16.5 (ANSI) |
| Class | 900 |
| Size range | NPS 1/2–24 |
| Size entries | 19 |
Representative form. Refer to the size table for the selected dimensions.
Dimension key
Dimensions & drilling
in = inches · lb = pounds
Scroll the table horizontally to see all dimensions. Approximate weights are for reference.
| Catalogue ref. | Nominal pipe size (NPS) | OD (O) | Thickness (T) | RF diameter (R) | Length through hub (Y) | Hub OD (X) | Bore (B) | Approx. weight | Bolt circle (C) | Bolt holes | Hole diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EG-F-032-001 | 1/2 | 4.75 in | 0.88 in | 1.38 in | 1.25 in | 1.50 in | 0.88 in | 4 lb | 3.25 in | 4 | 0.88 in |
| EG-F-032-002 | 3/4 | 5.13 in | 1.00 in | 1.69 in | 1.38 in | 1.75 in | 1.09 in | 5 lb | 3.50 in | 4 | 0.88 in |
| EG-F-032-003 | 1 | 5.88 in | 1.13 in | 2.00 in | 1.63 in | 2.06 in | 1.36 in | 8 lb | 4.00 in | 4 | 1.00 in |
| EG-F-032-004 | 1 1/4 | 6.25 in | 1.13 in | 2.50 in | 1.63 in | 2.50 in | 1.70 in | 9 lb | 4.38 in | 4 | 1.00 in |
| EG-F-032-005 | 1 1/2 | 7.00 in | 1.25 in | 2.88 in | 1.75 in | 2.75 in | 1.95 in | 12 lb | 4.88 in | 4 | 1.13 in |
| EG-F-032-006 | 2 | 8.50 in | 1.50 in | 3.63 in | 2.25 in | 4.13 in | 2.44 in | 25 lb | 6.50 in | 8 | 1.00 in |
| EG-F-032-007 | 2 1/2 | 9.63 in | 1.63 in | 4.13 in | 2.50 in | 4.88 in | 2.94 in | 36 lb | 7.50 in | 8 | 1.13 in |
| EG-F-032-008 | 3 | 9.50 in | 1.50 in | 5.00 in | 2.13 in | 5.00 in | 3.57 in | 26 lb | 7.50 in | 8 | 1.00 in |
| EG-F-032-009 | 4 | 11.50 in | 1.75 in | 6.19 in | 2.75 in | 6.25 in | 4.57 in | 53 lb | 9.25 in | 8 | 1.25 in |
| EG-F-032-010 | 5 | 13.75 in | 2.00 in | 7.31 in | 3.13 in | 7.50 in | 5.66 in | 83 lb | 11.00 in | 8 | 1.38 in |
| EG-F-032-011 | 6 | 15.00 in | 2.19 in | 8.50 in | 3.38 in | 9.25 in | 6.72 in | 110 lb | 12.50 in | 12 | 1.25 in |
| EG-F-032-012 | 8 | 18.50 in | 2.50 in | 10.63 in | 4.00 in | 11.75 in | 8.72 in | 170 lb | 15.50 in | 12 | 1.50 in |
| EG-F-032-013 | 10 | 21.50 in | 2.75 in | 12.75 in | 4.25 in | 14.50 in | 10.88 in | 245 lb | 18.50 in | 16 | 1.50 in |
| EG-F-032-014 | 12 | 24.00 in | 3.13 in | 15.00 in | 4.63 in | 16.50 in | 12.88 in | 325 lb | 21.00 in | 20 | 1.50 in |
| EG-F-032-015 | 14 | 25.25 in | 3.38 in | 16.25 in | 5.13 in | 17.75 in | 14.14 in | 400 lb | 22.00 in | 20 | 1.63 in |
| EG-F-032-016 | 16 | 27.75 in | 3.50 in | 18.50 in | 5.25 in | 20.00 in | 16.16 in | 425 lb | 24.25 in | 20 | 1.75 in |
| EG-F-032-017 | 18 | 31.00 in | 4.00 in | 21.00 in | 6.00 in | 22.25 in | 18.18 in | 600 lb | 27.00 in | 20 | 2.00 in |
| EG-F-032-018 | 20 | 33.75 in | 4.25 in | 23.00 in | 6.25 in | 24.50 in | 20.20 in | 730 lb | 29.50 in | 20 | 2.13 in |
| EG-F-032-019 | 24 | 41.00 in | 5.50 in | 27.25 in | 8.00 in | 29.50 in | 24.25 in | 1400 lb | 35.50 in | 20 | 2.63 in |
Selection notes
Facing in this dimensional series: 1/4 in raised face (RF).
A flat face (FF) can be specified with the inquiry.
Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.
Specify your flange.
Send the standard, class, size, material and quantity. Add a drawing for custom requirements.