EG-F-045

ASME B16.5 (ANSI) Class 2500 Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-045-001	1/2	5.25 in	1.19 in	1.38 in	7 lb	3.50 in	4	0.88 in
EG-F-045-002	3/4	5.50 in	1.25 in	1.69 in	8 lb	3.75 in	4	0.88 in
EG-F-045-003	1	6.25 in	1.38 in	2.00 in	11 lb	4.25 in	4	1.00 in
EG-F-045-004	1 1/4	7.25 in	1.50 in	2.50 in	17 lb	5.13 in	4	1.13 in
EG-F-045-005	1 1/2	8.00 in	1.75 in	2.88 in	23 lb	5.75 in	4	1.25 in
EG-F-045-006	2	9.25 in	2.00 in	3.63 in	39 lb	6.75 in	8	1.13 in
EG-F-045-007	2 1/2	10.50 in	2.25 in	4.13 in	56 lb	7.75 in	8	1.25 in
EG-F-045-008	3	12.00 in	2.63 in	5.00 in	86 lb	9.00 in	8	1.38 in
EG-F-045-009	4	14.00 in	3.00 in	6.19 in	135 lb	10.75 in	8	1.63 in
EG-F-045-010	5	16.50 in	3.63 in	7.31 in	225 lb	12.75 in	8	1.88 in
EG-F-045-011	6	19.00 in	4.25 in	8.50 in	345 lb	14.50 in	8	2.13 in
EG-F-045-012	8	21.75 in	5.00 in	10.63 in	530 lb	17.25 in	12	2.13 in
EG-F-045-013	10	26.50 in	6.50 in	12.75 in	1025 lb	21.25 in	12	2.63 in
EG-F-045-014	12	30.00 in	7.25 in	15.00 in	1300 lb	24.38 in	12	2.88 in

Facing in this dimensional series: 1/4 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.