EG-F-059

Industry Standard Class 150 Series A Slip-On Bolting Matches

Slip-over pipe connection. Select the bore, flange facing and drilling pattern for the mating connection.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Length through hub (Y)	Hub OD (X)	Min. fillet radius (r)	Bore (B)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-059-001	26	34.25 in	2.69 in	29.50 in	3.69 in	28.25 in	0.38 in	26.25 in	289 lb	31.75 in	24	1.38 in
EG-F-059-002	28	36.50 in	3.06 in	31.50 in	3.81 in	30.50 in	0.44 in	28.25 in	352 lb	34.00 in	28	1.38 in
EG-F-059-003	30	38.75 in	3.31 in	33.75 in	3.94 in	32.50 in	0.44 in	30.25 in	416 lb	36.00 in	28	1.38 in
EG-F-059-004	32	41.75 in	3.41 in	36.00 in	4.18 in	34.50 in	0.44 in	32.25 in	506 lb	38.50 in	28	1.62 in
EG-F-059-005	34	43.75 in	3.68 in	38.00 in	4.25 in	36.50 in	0.50 in	34.25 in	561 lb	40.50 in	32	1.62 in
EG-F-059-006	36	46.00 in	3.96 in	40.25 in	4.56 in	38.75 in	0.50 in	36.25 in	661 lb	42.75 in	32	1.62 in
EG-F-059-007	38	48.75 in	4.06 in	42.25 in	4.56 in	41.25 in	0.50 in	38.25 in	780 lb	45.25 in	32	1.62 in
EG-F-059-008	40	50.75 in	4.18 in	44.25 in	4.81 in	43.25 in	0.50 in	40.25 in	840 lb	47.25 in	36	1.62 in
EG-F-059-009	42	53.00 in	4.43 in	47.00 in	5.06 in	45.50 in	0.50 in	42.25 in	961 lb	49.50 in	36	1.62 in
EG-F-059-010	44	55.25 in	4.68 in	49.00 in	5.18 in	47.75 in	0.50 in	44.25 in	1071 lb	51.75 in	40	1.62 in
EG-F-059-011	46	57.25 in	4.86 in	51.00 in	5.31 in	49.75 in	0.50 in	46.25 in	1156 lb	53.75 in	40	1.62 in
EG-F-059-012	48	59.50 in	5.06 in	53.50 in	5.56 in	52.00 in	0.50 in	48.25 in	1282 lb	56.00 in	44	1.62 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

This is an industry bolt-pattern matching series. It is not an ASME B16.47 flange specification. Confirm the complete mating dimensions.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.