EG-F-063

Industry Standard Class 175 Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-063-001	26	31.50 in	1.78 in	29.00 in	405 lb	29.88 in	28	0.88 in
EG-F-063-002	28	33.50 in	2.00 in	31.00 in	490 lb	31.88 in	28	0.88 in
EG-F-063-003	30	35.75 in	2.13 in	33.25 in	590 lb	34.13 in	36	0.88 in
EG-F-063-004	32	37.75 in	2.25 in	35.25 in	700 lb	36.13 in	36	0.88 in
EG-F-063-005	34	40.25 in	2.38 in	37.38 in	840 lb	38.38 in	36	1.00 in
EG-F-063-006	36	42.25 in	2.50 in	39.38 in	970 lb	40.38 in	36	1.00 in
EG-F-063-007	38	44.25 in	2.63 in	41.38 in	1125 lb	42.38 in	36	1.00 in
EG-F-063-008	40	46.25 in	2.75 in	43.38 in	1300 lb	44.38 in	40	1.00 in
EG-F-063-009	42	49.00 in	2.88 in	45.75 in	1500 lb	46.88 in	40	1.13 in
EG-F-063-010	44	51.00 in	3.00 in	47.75 in	1700 lb	48.88 in	40	1.13 in
EG-F-063-011	46	53.00 in	3.13 in	49.75 in	1925 lb	50.88 in	40	1.13 in
EG-F-063-012	48	55.00 in	3.38 in	51.75 in	2225 lb	52.88 in	44	1.13 in
EG-F-063-013	50	57.00 in	3.38 in	53.75 in	2400 lb	54.88 in	44	1.13 in
EG-F-063-014	52	59.50 in	3.63 in	56.00 in	2800 lb	57.25 in	44	1.25 in
EG-F-063-015	54	61.50 in	3.63 in	58.00 in	3000 lb	59.25 in	44	1.25 in
EG-F-063-016	60	67.50 in	4.00 in	64.00 in	4000 lb	65.25 in	48	1.25 in
EG-F-063-017	66	73.50 in	4.38 in	70.00 in	5175 lb	71.25 in	56	1.25 in
EG-F-063-018	72	80.00 in	4.75 in	76.50 in	6650 lb	77.75 in	64	1.25 in
EG-F-063-019	84	94.00 in	5.50 in	90.13 in	10815 lb	91.50 in	72	1.38 in
EG-F-063-020	96	106.00 in	6.13 in	102.13 in	15325 lb	103.50 in	88	1.38 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.