EG-F-082

ASME B16.47 Class 75 Series B Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Min. thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-082-001	26	30.00 in	1.31 in	27.75 in	255 lb	28.50 in	36	0.75 in
EG-F-082-002	28	32.00 in	1.31 in	29.75 in	290 lb	30.50 in	40	0.75 in
EG-F-082-003	30	34.00 in	1.31 in	31.75 in	330 lb	32.50 in	44	0.75 in
EG-F-082-004	32	36.00 in	1.44 in	33.75 in	390 lb	34.50 in	48	0.75 in
EG-F-082-005	34	38.00 in	1.50 in	35.75 in	430 lb	36.50 in	52	0.75 in
EG-F-082-006	36	40.69 in	1.67 in	38.00 in	520 lb	39.06 in	40	0.88 in
EG-F-082-007	38	42.69 in	1.75 in	40.00 in	595 lb	41.06 in	40	0.88 in
EG-F-082-008	40	44.69 in	1.75 in	42.00 in	760 lb	43.06 in	44	0.88 in
EG-F-082-009	42	46.69 in	1.88 in	44.00 in	895 lb	45.06 in	48	0.88 in
EG-F-082-010	44	49.25 in	1.94 in	46.25 in	1065 lb	47.38 in	36	1.00 in
EG-F-082-011	46	51.25 in	2.00 in	48.25 in	1185 lb	49.38 in	40	1.00 in
EG-F-082-012	48	53.25 in	2.12 in	50.25 in	1315 lb	51.38 in	44	1.00 in
EG-F-082-013	50	55.25 in	2.18 in	52.25 in	1505 lb	53.38 in	44	1.00 in
EG-F-082-014	52	57.38 in	2.25 in	54.25 in	1665 lb	55.50 in	48	1.00 in
EG-F-082-015	54	59.38 in	2.38 in	56.25 in	1840 lb	57.50 in	48	1.00 in
EG-F-082-016	56	62.00 in	2.44 in	58.50 in	2111 lb	59.88 in	40	1.12 in
EG-F-082-017	58	64.00 in	2.50 in	60.50 in	2300 lb	61.88 in	44	1.12 in
EG-F-082-018	60	66.00 in	2.62 in	62.50 in	2500 lb	63.88 in	44	1.12 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.