EG-F-084

ASME B16.47 Class 150 Series B Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Max. thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-084-001	26	30.94 in	1.75 in	28.00 in	375 lb	29.31 in	36	0.88 in
EG-F-084-002	28	32.94 in	1.88 in	30.00 in	455 lb	31.31 in	40	0.88 in
EG-F-084-003	30	34.94 in	2.00 in	32.00 in	545 lb	33.31 in	44	0.88 in
EG-F-084-004	32	37.06 in	2.12 in	34.00 in	648 lb	35.44 in	48	0.88 in
EG-F-084-005	34	39.56 in	2.25 in	36.25 in	782 lb	37.69 in	40	1.00 in
EG-F-084-006	36	41.62 in	2.31 in	38.25 in	890 lb	39.75 in	44	1.00 in
EG-F-084-007	38	44.25 in	2.50 in	40.25 in	1090 lb	42.12 in	40	1.12 in
EG-F-084-008	40	46.25 in	2.62 in	42.50 in	1247 lb	44.12 in	44	1.12 in
EG-F-084-009	42	48.25 in	2.69 in	44.50 in	1393 lb	46.12 in	48	1.12 in
EG-F-084-010	44	50.25 in	2.81 in	46.50 in	1579 lb	48.12 in	52	1.12 in
EG-F-084-011	46	52.81 in	2.94 in	48.62 in	1825 lb	50.56 in	40	1.25 in
EG-F-084-012	48	54.81 in	3.06 in	50.75 in	2045 lb	52.56 in	44	1.25 in
EG-F-084-013	50	56.81 in	3.18 in	52.75 in	2284 lb	54.56 in	48	1.25 in
EG-F-084-014	52	58.81 in	3.31 in	54.75 in	2547 lb	56.56 in	52	1.25 in
EG-F-084-015	54	61.00 in	3.44 in	56.75 in	2848 lb	58.75 in	56	1.25 in
EG-F-084-016	56	63.00 in	3.56 in	58.75 in	3145 lb	60.75 in	60	1.25 in
EG-F-084-017	58	65.94 in	3.68 in	60.75 in	3560 lb	63.44 in	48	1.38 in
EG-F-084-018	60	67.94 in	3.81 in	63.00 in	3913 lb	65.44 in	52	1.38 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.