EG-F-086

ASME B16.47 Class 300 Series B Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Min. thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-086-001	26	34.12 in	3.50 in	29.00 in	905 lb	31.62 in	32	1.38 in
EG-F-086-002	28	36.25 in	3.50 in	31.00 in	1023 lb	33.75 in	36	1.38 in
EG-F-086-003	30	39.00 in	3.69 in	33.25 in	1250 lb	36.25 in	36	1.50 in
EG-F-086-004	32	41.50 in	4.06 in	35.50 in	1556 lb	38.50 in	32	1.62 in
EG-F-086-005	34	43.62 in	4.06 in	37.50 in	1719 lb	40.62 in	36	1.62 in
EG-F-086-006	36	46.12 in	4.06 in	39.75 in	1920 lb	42.88 in	32	1.75 in
EG-F-086-007	38	48.12 in	4.38 in	41.75 in	2257 lb	44.88 in	36	1.75 in
EG-F-086-008	40	50.12 in	4.56 in	43.88 in	2550 lb	46.88 in	40	1.75 in
EG-F-086-009	42	52.50 in	4.69 in	46.00 in	2875 lb	49.00 in	36	1.88 in
EG-F-086-010	44	54.50 in	5.00 in	48.00 in	3305 lb	51.00 in	40	1.88 in
EG-F-086-011	46	57.50 in	5.12 in	50.00 in	3766 lb	53.75 in	36	2.00 in
EG-F-086-012	48	59.50 in	5.31 in	52.25 in	4183 lb	55.75 in	40	2.00 in
EG-F-086-013	50	61.50 in	5.50 in	54.25 in	4629 lb	57.75 in	44	2.00 in
EG-F-086-014	52	63.50 in	5.68 in	56.25 in	5096 lb	59.75 in	48	2.00 in
EG-F-086-015	54	65.88 in	5.88 in	58.25 in	5679 lb	62.12 in	48	2.00 in
EG-F-086-016	56	69.50 in	6.18 in	60.50 in	6642 lb	65.00 in	36	2.38 in
EG-F-086-017	58	71.94 in	6.38 in	62.75 in	7347 lb	67.44 in	40	2.38 in
EG-F-086-018	60	73.94 in	6.56 in	65.00 in	7980 lb	69.44 in	40	2.38 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.