EG-F-074

ASME B16.47 Class 300 Series A Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-074-001	26	38.25 in	3.31 in	29.50 in	1079 lb	34.50 in	28	1.75 in
EG-F-074-002	28	40.75 in	3.56 in	31.50 in	1315 lb	37.00 in	28	1.75 in
EG-F-074-003	30	43.00 in	3.75 in	33.75 in	1545 lb	39.25 in	28	1.88 in
EG-F-074-004	32	45.25 in	3.94 in	36.00 in	1795 lb	41.50 in	28	2.00 in
EG-F-074-005	34	47.50 in	4.12 in	38.00 in	2068 lb	43.50 in	28	2.00 in
EG-F-074-006	36	50.00 in	4.38 in	40.25 in	2435 lb	46.00 in	32	2.12 in
EG-F-074-007	38	46.00 in	4.25 in	40.50 in	2001 lb	43.00 in	32	1.62 in
EG-F-074-008	40	48.75 in	4.50 in	42.75 in	2380 lb	45.50 in	32	1.75 in
EG-F-074-009	42	50.75 in	4.69 in	44.75 in	2689 lb	47.50 in	32	1.75 in
EG-F-074-010	44	53.25 in	4.88 in	47.00 in	3079 lb	49.75 in	32	1.88 in
EG-F-074-011	46	55.75 in	5.06 in	49.00 in	3500 lb	52.00 in	28	2.00 in
EG-F-074-012	48	57.75 in	5.25 in	51.25 in	3896 lb	54.00 in	32	2.00 in
EG-F-074-013	50	60.25 in	5.50 in	53.50 in	4442 lb	56.25 in	32	2.12 in
EG-F-074-014	52	62.25 in	5.69 in	55.50 in	4906 lb	58.25 in	32	2.12 in
EG-F-074-015	54	65.25 in	6.00 in	57.75 in	5684 lb	61.00 in	28	2.38 in
EG-F-074-016	56	67.25 in	6.06 in	59.75 in	6099 lb	63.00 in	28	2.38 in
EG-F-074-017	58	69.25 in	6.25 in	62.00 in	6669 lb	65.00 in	32	2.38 in
EG-F-074-018	60	71.25 in	6.44 in	64.00 in	7274 lb	67.00 in	32	2.38 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.