EG-F-010

ASME B16.5 (ANSI) Class 150 Blind Flanges

Solid flange for closing a flanged opening. Match the class, facing and bolt pattern of the mating flange.

Representative form. Refer to the size table for the selected dimensions.

Dimension key

in = inches · lb = pounds

Scroll the table horizontally to see all dimensions. Approximate weights are for reference.

Catalogue ref.	Nominal pipe size (NPS)	OD (O)	Thickness (T)	RF diameter (R)	Approx. weight	Bolt circle (C)	Bolt holes	Hole diameter
EG-F-010-001	1/2	3.50 in	0.44 in	1.38 in	1 lb	2.38 in	4	0.63 in
EG-F-010-002	3/4	3.88 in	0.50 in	1.69 in	2 lb	2.75 in	4	0.63 in
EG-F-010-003	1	4.25 in	0.56 in	2.00 in	2 lb	3.13 in	4	0.63 in
EG-F-010-004	1 1/4	4.63 in	0.63 in	2.50 in	3 lb	3.50 in	4	0.63 in
EG-F-010-005	1 1/2	5.00 in	0.69 in	2.88 in	4 lb	3.88 in	4	0.63 in
EG-F-010-006	2	6.00 in	0.75 in	3.63 in	5 lb	4.75 in	4	0.75 in
EG-F-010-007	2 1/2	7.00 in	0.88 in	4.13 in	7 lb	5.50 in	4	0.75 in
EG-F-010-008	3	7.50 in	0.94 in	5.00 in	9 lb	6.00 in	4	0.75 in
EG-F-010-009	3 1/2	8.50 in	0.94 in	5.50 in	13 lb	7.00 in	8	0.75 in
EG-F-010-010	4	9.00 in	0.94 in	6.19 in	17 lb	7.50 in	8	0.75 in
EG-F-010-011	5	10.00 in	0.94 in	7.31 in	20 lb	8.50 in	8	0.88 in
EG-F-010-012	6	11.00 in	1.00 in	8.50 in	26 lb	9.50 in	8	0.88 in
EG-F-010-013	8	13.50 in	1.13 in	10.63 in	45 lb	11.75 in	8	0.88 in
EG-F-010-014	10	16.00 in	1.19 in	12.75 in	70 lb	14.25 in	12	1.00 in
EG-F-010-015	12	19.00 in	1.25 in	15.00 in	110 lb	17.00 in	12	1.00 in
EG-F-010-016	14	21.00 in	1.38 in	16.25 in	140 lb	18.75 in	12	1.13 in
EG-F-010-017	16	23.50 in	1.44 in	18.50 in	180 lb	21.25 in	16	1.13 in
EG-F-010-018	18	25.00 in	1.56 in	21.00 in	220 lb	22.75 in	16	1.25 in
EG-F-010-019	20	27.50 in	1.69 in	23.00 in	285 lb	25.00 in	20	1.25 in
EG-F-010-020	22	29.50 in	1.81 in	25.25 in	355 lb	27.25 in	20	1.38 in
EG-F-010-021	24	32.00 in	1.88 in	27.25 in	430 lb	29.50 in	20	1.38 in

Facing in this dimensional series: 1/16 in raised face (RF).

A flat face (FF) can be specified with the inquiry.

Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.

Send the standard, class, size, material and quantity. Add a drawing for custom requirements.