EG-F-065
Industry Standard Class 250 Slip-On Flanges
Slip-over pipe connection. Select the bore, flange facing and drilling pattern for the mating connection.
| Series | Industry Standard |
| Class | 250 |
| Size range | NPS 26–48 |
| Size entries | 12 |
Representative form. Refer to the size table for the selected dimensions.
Dimension key
Dimensions & drilling
in = inches · lb = pounds
Scroll the table horizontally to see all dimensions. Approximate weights are for reference.
| Catalogue ref. | Nominal pipe size (NPS) | OD (O) | Thickness (T) | RF diameter (R) | Length through hub (Y) | Hub base OD (X) | Bore (B) | Approx. weight | Bolt circle (C) | Bolt holes | Hole diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EG-F-065-001 | 26 | 38.25 in | 2.81 in | 32.44 in | 4.75 in | 30.50 in | 26.25 in | 530 lb | 34.50 in | 28 | 1.88 in |
| EG-F-065-002 | 28 | 40.75 in | 2.94 in | 34.94 in | 5.00 in | 33.00 in | 28.25 in | 640 lb | 37.00 in | 28 | 1.88 in |
| EG-F-065-003 | 30 | 43.00 in | 3.00 in | 37.19 in | 5.00 in | 35.25 in | 30.25 in | 710 lb | 39.25 in | 28 | 1.88 in |
| EG-F-065-004 | 32 | 45.25 in | 3.12 in | 39.44 in | 5.13 in | 37.50 in | 32.25 in | 800 lb | 41.50 in | 28 | 1.88 in |
| EG-F-065-005 | 34 | 47.50 in | 3.25 in | 41.44 in | 5.25 in | 39.50 in | 34.25 in | 890 lb | 43.50 in | 28 | 1.88 in |
| EG-F-065-006 | 36 | 50.00 in | 3.38 in | 43.69 in | 5.38 in | 41.50 in | 36.25 in | 970 lb | 46.00 in | 32 | 2.13 in |
| EG-F-065-007 | 38 | 52.25 in | 3.44 in | 45.69 in | 5.50 in | 43.50 in | 38.25 in | 1050 lb | 48.00 in | 32 | 2.13 in |
| EG-F-065-008 | 40 | 54.50 in | 3.56 in | 47.94 in | 5.50 in | 45.75 in | 40.25 in | 1175 lb | 50.25 in | 36 | 2.13 in |
| EG-F-065-009 | 42 | 57.00 in | 3.69 in | 50.44 in | 5.63 in | 47.75 in | 42.25 in | 1300 lb | 52.75 in | 36 | 2.13 in |
| EG-F-065-010 | 44 | 59.25 in | 3.75 in | 52.69 in | 5.75 in | 49.75 in | 44.25 in | 1400 lb | 55.00 in | 36 | 2.13 in |
| EG-F-065-011 | 46 | 61.50 in | 3.88 in | 54.94 in | 5.88 in | 51.75 in | 46.25 in | 1500 lb | 57.25 in | 40 | 2.13 in |
| EG-F-065-012 | 48 | 65.00 in | 4.00 in | 58.44 in | 6.00 in | 54.00 in | 48.25 in | 1800 lb | 60.75 in | 40 | 2.13 in |
Selection notes
Facing in this dimensional series: 1/16 in raised face (RF).
A flat face (FF) can be specified with the inquiry.
Class designations are not direct pressure values. Confirm material grade, temperature, facing and the applicable standard edition before ordering.
Specify your flange.
Send the standard, class, size, material and quantity. Add a drawing for custom requirements.